アクセスカウンター
  • 東京理科大学基礎工学部材料工学科西尾研究室


業績リスト



1.　論文（査読有り）
2019年度

  1. Takuji Ube, Jun Koyanagi, Takahiro Kosaki, Kenjiro Fujimoto, Tomohiro Yokozeki, Takashi Ishiguro, Keishi Nishio, Fabrication of well-isolated graphene and evaluation of thermoelectric performance of polyaniline–graphene composite film, MATER. SCI., 54, No. 5, 3904-3913 (2019)
  2. Shunichi Suzuki, Keishi Nishio, and Naoto Kikuchi, Electrical and optical properties of wide-gap n-type Sn2Ta2O7 films, VAC. SCI. & TECH. A, A 37, 031501 (2019)
  3. Naomi Hirayama, Tsutomu Iida, Mariko Sakamoto, Keishi Nishio & Noriaki Hamada, Substitutional and interstitial impurity p-type doping of thermoelectric Mg2Si: a theoretical study, AND TECH. OF ADV. MATER., 20, No.1, 160-172 (2019)
  4. Akane Samizo, Naoto Kikuchi, and Keishi Nishio, Effect of Crystal Structure on Hole Carrier Generation in Wide-gap P-type Tin-Niobate, MRS Advances, 電子媒体, (2019)
  5. Roy Ishihara, Yuki Yamaguchi, Kanta Tanabe, Yoshihiro Makino, Keishi Nishio, Preparation of Pt/WO3-coated polydimethylsiloxane membrane for transparent/flexible hydrogen gas sensors, CHEM. AND PHYS., 226, 226-229 (2019)
  6. Hui Wei, Midori Oe, Ryo Inoue, Akihisa Aimi, Kenjiro Fujimoto, Keishi Nishio, Thermal expansion coefficient controlled Cu-ZrW2-xMoxO8 cermet material prepared using spark plasma sintering method, Proceeding of the 42nd International Conference on Advanced Ceramics and Composites, Ceramic Engineering and Science Proceedings, 2, 233-240 (2019)


2018年度

  1. Akane Samizo, Naoto Kikuchi, Yoshihiro Aiura, Keishi Nishio, and Ko Mibu, Cattier Generation in p-Type Wide-Gap Oxide: SnNb2O6 Foordite, MATER., 電子媒体　(2018)
  2. Hui Wei, Marin Hasegawa, Shunsuke Mizutani, Akihisa Aimi, Kenjiro Fujimoto, Keishi Nishio, Low-Temperature Spark Plasma Sintering of ZrW2-xMoxO8 Exhibiting Controllable Negative Thermal Expansion, Materials, 11, No.9, 1582 (2018)
  3. Tomoyuki Nakamura, Kentaro Yoshioka, Ryuichi Arai, Jun-ichi Nishioka, Mikiyasu Hirakawa, Kenjiro Fujimoto, Ryuji Tamura, and Keishi Nishio, Thermoelectric properties of Cr-doped higher manganese silicides prepared using spark plasma sintering, MRS Advances, 電子媒体, (2018)
  4. Kentaro Yamamoto, Tomoyuki Nakamura, Kenjiro Fujimoto, Ryuji Tamura, Keishi Nishio, Preparation of NiSi2 and application to thermoelectric silicide elements used as electrodes, MRS Advances, 電子媒体, (2018)


2017年度

  1. Naoto Kikuchi, Akane Samizo, Shintaro Ikeda, Yoshihiro Aiura, Ko Mibu and Keishi Nishio, Carrier generation in a p-type oxide semiconductor: Sn2(Nb2-x Tax)O7, REV. MATER., 1, 021601-1-021601-6 (2017)
  2. Kenjiro FUJIMOTO, Minoru GIBU, Yuki YAMAGUCHI, Akihisa AIMI, Keishi NISHIO, Oded RABIN and Ichiro TAKEUCHI, Thermoelectric properties of bismuth-substituted calcium manganite Ca1-xBixMnO3-d prepared via the electrostatic spray deposition method, THE CERAM. SOC. JPN, 125, No.4, 308-312 (2017)
  3. Naomi Hirayama, Tsutomu Iida, Keishi Nishio, Yasuo Kogo, Kenji Takarabe, and Noriaki Hamada, Influence of native defects on structural and electronic properties of magnesium silicide, J. APP. PHYS., 56, (2017)


2016年度

  1. Kenjiro FUJIMOTO, Takuto ISA, Haruka SAKURAI, Yuki YAMAGUCHI, Shigeru ITO and Keishi NISHIO, Preparation and Characterization of Ca3(Co,M)4O9+δ Type Thermoelectric Materials Using the Electrostatic Spray Deposition Method, TRANS., 57, No.9, 1482-1488 (2016)
  2. Yuki Yamaguchi, Shunji Imamura, Keishi Nishio and Kenjiro Fujimoto, Influence of temperature and humidity on the electrical sensing of Pt/WO3 thin film hydrogen gas sensor, J. THE CERAM. SOC. JPN, 126, No.6, 629-633 (2016)
  3. Miharu Iida, Tomoyuki Nakamura, Kenjiro Fujimoto, Yuki Yamaguchi, Ryuji Tamura, Tsutomu Iida and Keishi Nishio, Thermoelectric Properties of Mg2Si1-x-yGexSby Prepared by Spark Plasma Sintering, MRS Advances, 電子媒体,(2016)
  4. Kenjiro Fujimoto, Minoru Gibu, Yuki Yamaguchi and Keishi Nishio, Phase relation and thermoelectric property of Ca1-xBixMn1-yNiyO3 (0≤x,y≤0.1), MRS Advances, 電子媒体,(2016)


2015年度

  1. Yuki YAMAGUCHI, Chika NEMOTO, Shigeru ITO, Keishi NISHIO and Kenjiro FUJIMOTO, Improvement of hydrogen gas sensing property of the sol–gel derived Pt/WO3 thin film by Ti-doping, THE CERAM. SOC. JPN, 123, No.12, 1102-1105 (2015)
  2. Asumi Sasaki, Koya Arai, Yuto Kimori, Tomoyuki Nakamura, Kenjiro Fujimoto, Yuki Yamaguchi, Ryuji Tamura, Tsutomu Iida and Keishi Nishio, Thermoelectric properties of synthesized Mg2Si95-xGe0.05Sbx by spark plasma sintering, MRS Advances, 1735, 電子媒体,(2015)
  3. Kota Sunohara, Koya Arai, Tomoyuki Nakamura, Kenjiro Fujimoto, Yuki Yamaguchi, Tsutomu Iida and Keishi Nishio, Investigation of Mg2Si formation from Si and Mg by using spark plasma sintering synthesis, MRS Advances, 1735, 電子媒体,(2015)
  4. Yuki Yamaguchi, Shunji Imamura, Shigeru Ito, Keishi Nishio, Kenjiro Fujimoto, Influence of oxygen gas concentration on hydrogen sensing of Pt/WO3 thin film prepared by sol–gel process, SENSORS AND ACTUATORS B-CHEMICAL, 216, 394-401 (2015)
  5. Hirayama, T. Iida, S. Morioka, M. Sakamoto, K. Nishio, Y. Kogo, Y. Takanashi, and N. Hamada, First-principles investigation of structural, electronic, and thermoelectric properties of n- and p-type Mg2Si, Journal of Material Research, 30, No.17, 2564-2577 (2015)
  6. Ishikawa, T. Nakamura, S. Hirata, T. Iida, K. Nishio, and Y. Kogo, Mechanical properties of Mg2Si with metallic binders, J. J. APP. PHYS., 54, No.7S2, 07JC03-1-07JC03-7 (2015)
  7. Hirayama, T. Iida, S. Morioka, M. Sakamoto, K. Nishio, Y. Kogo, Y. Takanashi, N. Hamada, Theoretical analysis of structure and formation energy of impurity-doped Mg2Si: Comparison of first-principles codes for material properties, J. J. APP. PHYS., 54, No.7S2, 07JC05-1-07JC05-6 (2015)
  8. Naomi Hirayama, Tsutomu Iida, Hiroki Funashima, Shunsuke Morioka, Mariko Sakamoto, Keishi Nishio, Yasuo Kogo, Yoshifumi Takanashi, Noriaki Hamada, First-Principles Study on Structural and Thermoelectric Properties of Al- and Sb-Doped Mg2Si, Journal of Electronic Materials, 44, No.6, 1656-1662 (2015)
  9. Masashi Ishikawa, Takashi Nakamura, Shusaku Hirata, Tsutomu Iida, Keishi Nishio, and Yasuo Kogo, Mechanical properties of Mg2Si with metallic binders, Japanese Journal of Applied Physics, 54, 07JC03-1-07JC03-7 (2015)
  10. 藤本 憲次郎、伊佐 拓人、櫻井 はるか、山口 祐貴、西尾 圭史、伊藤 滋, 静電噴霧熱分解法によるCa3(Co,M)O9+δ型熱電材料（M;Al,Cu)の作製と評価, Journal of the Japan Society of Powder and Powder Metallurgy, 62, No.4, 175-184 (2015)
  11. Koya Arai, Asumi Sasaki, Yuto Kimori, Miharu Iida, Tomoyuki Nakamura, Yuki Yamaguchi, Kenjiro Fujimoto, Ryuji Tamura, Tsutomu Iida, Keishi Nishio, Thermoelectric properties of Sb-doped Mg2(Si95Ge0.05) synthesized by spark plasma sintering, Materials Science and Engineering B-Advanced Functional Solid-State Materials, 195, 45-49(2015)


2014年度

  1. Sakamoto, T. Iida, K. Sekiguchi, Y. Taguchi, N. Hirayama, K. Nishio and Y. Takanashi, Selection and Evaluation of Thermal Interface Materials for Reduction of the Thermal Contact Resistance
of Thermoelectric Generators, JOURNAL OF ELECTRONIC MATERIALS, 43, No.6, 3792-3800 (2014)
  2. Sakamoto, T. Iida, Y. Ohno, M. Ishikawa, Y. Kogo, N. Hirayama, K. Arai, T. Nakamura, K. Nishio and Y. Takanashi, Stress Analysis and Output Power Measurement of an n-Mg2Si Thermoelectric Power Generator with an Unconventional Structure, JOURNAL OF ELECTRONIC MATERIALS, 43, 6, 1620-1629 (2014)
  3. Oto, T. Iida, T. Sakamoto, R. Miyahara, A. Natsui, K. Nishio, Y. Kogo, N. Hirayama, and Y. Takanashi, Thermoelectric properties and durability at elevated temperatures of impurity oped n-type Mg2Si, Phys. Status Solidi C, 10, 12, 1857-1861 (2014)


2013年度
1. Hirobumi Shibata, Taku Ogura, Keishi Nishio, Hideki Sakai, Masahiko Abe, Kazuaki Hashimoto, Mutsuyoshi Matsumoto, Facile synthesis of mesoporous gold particles using silica as a binder through a solvent evaporation process, Trans. Mat. Res. Soc. Japan, 38, 2, 221-223, (2013)

2012年年度
2. Takanori Imai, Yoshimoto Abe, Keishi Nishio, Ryuji Tamura, Hirobumi Shibata, Tohru Kineri and Takahiro Gunji, Preparation of platinum nanoparticles that are dispersible in water over a wide pH range, POLYMER JOURNAL, 45, 540-544, (2012)
3. K. Arai, M. Matsubara, Y. Sawada, T. Sakamoto, T. Kineri, Y. Kogo, T. Iida and K. Nishio, Improvement of Electrical Contact Between TE Material and Ni Electrode Interfaces by Application of a Buffer Layer, Journal of Electronic Materials, Springer, 41, 6 (2012) 1771-1777 DOI:10.1007/s11664-012-2036-3
4. TATSUYA SAKAMOTO, TSUTOMU IIDA, YUTAKA TAGUCHI, SHOTA KUROSAKI, YUSUKE HAYATSU, KEISHI NISHIO, YASUO KOGO, and YOSHIFUMI TAKANASHI, Examination of a Thermally Viable Structure for an Unconventional Uni-Leg Mg2Si Thermoelectric Power Generator, J. ELECTRO. MATER., (2012) doi:10.1007/s11664-012-1974-0
5. Yuki Yamaguchi, Yukari Emoto, Tohru Kineri, Masakatsu Fujimoto, Hideo Mae, Atsuo Yasumori and Keishi Nishio, Hydrogen gas-sensing properties of Pt/WO3 thin films in various measurement conditions, Ionics, 18 (2012) 449-453 DOI:10.1007/s11581-012-0683-2

2011年度
6. Y. Yamaguchi, T. Kineri, M. Fujimoto, H. Mae, A. Yasumori and K. Nishio, Investigation of Electrical Hydrogen Detection Properties of Pt/WO3 Thin Films Prepared by Sol-Gel Method, Key Engineering Materials, 485 (2011) pp.271-274
7. K. Arai, H. Akimoto, T. Kineri, T. Iida and K. Nishio, Preparation and Thermoelectric Properties of TE Module by a Spark Plasma Sintering Method, Key Engineering Materials, 485 (2011) pp.169-172
8. Hirobumi Shibata, Taku Ogura, Keishi Nishio, Hideki Sakai, Masahiko Abe, Kazuaki Hashimoto, Mutsuyoshi Matsumoto, Fabrication and Pore Size Control of Large-Pore Mesoporous Silica Particles through a Solvent Evaporation Process, Silicon, 3 (2011) pp.139-143
9. T. Sakamoto, T. Iida, S. Kurosaki, K. Yano, H. Taguchi, K. Nishio, and Y. Takanashi, Thermoelectric Behavior of Sb- and Al-Doped n-Type Mg2Si Device Under Large Temperature Differences, JOURNAL OF ELECTRONIC MATERIALS, 40, 5 (2011) pp.629-634
10. Daisuke Watanabe, Keishi Nishio, Yoshio Sakka, Masataka Ohgaki, Ian J. Davies, Tomohiro Umeda, Seiichiro Koda, Kiyoshi Itatani, Fabrication of dense -calcium orthophosphate with submicrometer-sized grains and its high-temperature superplastic deformation, JOURNAL OF MATERIALS SCIENCE, 46, 6, (2011) pp.1956-1962
11. Hirobumi Shibata, Shin-ichi Ohshika, Taku Ogura, Satoshi Watanabe, Keishi Nishio, Hideki Sakai, Masahiko Abe, Kazuaki Hashimoto, Mutsuyoshi Matsumoto, Preparation and photocatalytic activity under visible light irradiation of mesostructured titania particles modified with phthalocyanine in the pores, JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY, 217 (2011) pp.136-140

2010年度
12. TAKASHI NEMOTO, TSUTOMU IIDA, JUNICHI SATO, YOHEI OGUNI, ATSUNOBU MATSUMOTO, TAKAHIRO MIYATA, TATSUYA SAKAMOTO, TADAO NAKAJIMA, HIROHISA TAGUCHI, KEISHI NISHIO, and YOSHIFUMI TAKANASHI, Characteristics of a Pin-Fin Structure Thermoelectric Uni-Leg Device Usiong a Commercial n-Type Mg2Si Source, J. ELECTRO. MATER., 39, 9 (2010) pp.1572-1578
13. R. Kawai, T. Kamoi, T. Fukuzaki, R. Tamura, K. Nishio, A. Hayashi, N. Aikawa, Effect of Nb and Zr additions to magnetic properties of Nd-Fe-B bulk nanocomposites, Journal of Physics: Conferene Series, 232 (2010) 012008
14. Hirobumi Shibata, Yukitoshi Chiba, Tohru Kineri, Mutsuyoshi Matsumoto, Keishi Nishio, The effect of heat treatment on the interplanar spacing of the mesostructure during the synthesis of mesoporous MCM-41 silica, COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 358 (2010) pp.1-5

2009年
15. K. Tanaka, T. Fukuzaki, K. Nishio and R. Tamura, Magnetic properties of Nd-Fe-B-Zr bulk nanocomposite magnets prepared by Spark Plasma Sintering, Journal of Physics: Conference Series, 191 (2009) 012025
16. T. Fukuzaki, K. Tanaka, K. Nishio and R. Tamura, Optimization of the magnetic properties of the Fe3B/Nd2Fe14B bulk nanocomposite magnets prepared by spark plasma sintering, Journal of Physics: Conference Series, 191 (2009) 012022
17. Hirobumi Shibata, Tomoaki Morita, Taku Ogura, Keishi Nishio, Hideki Sakai, Masahiko Abe, Mutsuyoshi Matsumoto, Preparation and mesostructure control of highly ordered zirconia particles having crystalline walls, JOURNAL OF MATERIALS SCIENCE, 44, [10] (2009) pp.2541-2547
18. 柴田裕史、西坂洋輔、小倉卓、西尾圭史、酒井秀樹、阿部正彦、松本睦良, 大口径メソポーラスシリカの調製および被可溶化物質が細孔構造特性に与える影響, MATERIAL TECHNOLOGY, 27, [1] (2009) pp.21-26
19. Kenji Kanamori, Tohru Kineri, Ryohei Fukuda, Takafumi Kawano, Keishi Nishio, Low-temperature sintering of ZrW2O8-SiO2 by spark plasma sintering, JOURNAL OF MATERIALS SCIENCE 44, [3] (2009) pp.855-860

2008年
20. Kenji Kanamori, Tohru Kineri and Keishi Nishio, Preparation and formation mechanism of ZrW2O8 by sol-gel process, J. Am. Ceram. 91 [11] (2008) pp.3542-3545
21. Kenji Kanamori, Tohru Kineri, Ryohei Fukuda, Keishi Nishio, Hideo Mae, Spark Plasma sintering of Sol-gel derived Amorphous ZrW2O8 Nanopowder, J. Am. Ceram. 92, [1] (2009) pp.32-35
22. T. Fukuzaki, K. Tanaka, K. Nishimoto, Y. Muro, K. Nishio and R. Tamura, Magnetic Property and Microstructure of Nd-Fe-B-M(M=Si, C) Bulk Nanocomposite Magnets Prepared by Spark Plasma Sintering Method, J. Physics: Conference Series (The Second International Symposium on Atomic Technology), 106 (2008) 012015(5ページ)
23. K. Tanaka, T. Fukuzaki, T. Miyasaka, K. Nishimoto, Y. Muro, K. Nishio and R. Tamura, Magnetic Properties of Nd-Fe-B-Zr Bulk Nanocomposite Magnets Prepared by Spark Plasma Sintering Method, J. Physics: Conference Series (The Second International Symposium on Atomic Technology), 106 (2008) 012015(5ページ)

2007年
24. 西尾圭史、杉山弘晃、川原稔央、安盛敦雄、木練透、ゾル−ゲル法と放電プラズマ法の併用による熱膨張係数制御コンポジットセラミックスZrW2O8/NiWO4の作製、J. Soc. Inorg. Mater. Japan, 14 (2007) pp. 287-293
25. 西尾圭史、川原稔央、福田良平、和田多美絵、安盛敦雄、木練透、負の熱膨張を示すZrW2O8の低温合成と熱膨張に与える影響、J. Soc. Inorg. Mater. Japan, 14 (2007) pp. 69-74
26. S. Furuyama, T. Iida, S. Matsui, M. Akasaka, K. Nishio, and Y. Takanashi, Thermoelectric properties of undoped p-type CoSb3 prepared by the vertical Bridgman crystal growth and the spark plasma sintering, Journal of Alloys and Compounds 415, (2006) pp. 251-256
27. M. Akasaka, T. Iida, T. Baba, S. Kawakami, K. Nishio and Y. Takanashi, Composition dependent thermoelectric properties of sintered Mg2Si1-xGex (x=0 to 1) initiated from melt-grown polycrystalline source, Thin Solid Films, 515 (2007) pp. 8237-8241

2006年
28. Yoshiaki Sone, Takeshi Ohgaki, Keishi Nishio, Tsuttomu Yamashita and Atsuo Yasumori, Photocatalytic Machining of Organic Phlymer Surface by Use of Porous Titania Micro Wire, J. Photopolymer Science and Technology, Vol. 19, Number 1 (2006) pp. 111-116
29. Shigeki Kishi, Norikazu Okimoto, Satoshi Nakamura, Keishi Nishio, Kazuaki Hashimoto, Yoshitomo Toda, Kimihiro Yamashita, Chemicovector Effect of Nano-Size-Hydroxyapatite Doped YSZ Ceramics on Apatite Formability in SBF, Key Engineering Materials, Vol. 309-311 (2006) pp.589-592

2005年
30. 山下仁大、中村聡、岸臣樹、犬塚真博、西尾圭史、橋本和明、戸田善朝, ベクトル材料科学に基づくジルコニアバイオセラミックスの生体活性化、粉体及び粉末冶金, 52, [5] (2005) pp. 347-350
31. Takashi Nakajima, Keishi Nishio, Tadashi Ishigaki and Toshio Tsuchiya, Preparation and Electrical Properties of Lnx(SiO4)O(1.5x-12) (Ln:Nd, La) with Apatite Structure, J. Sol-Gel Science and Technology, 32 (2004) pp. 1-5
32. Kyu-Seog Hwang, Bo-An Kang, Young-Sun Jeon, Jun-Hyung An, Byung-Hoon Kim, Keishi Nishio, Toshio Tsuchiya, AFM study of LaNiO3 thin films on various single crystal substrates prepared by using a metal naphthenate precursor, Surface & Coatings Technology, 190 (2005) pp. 331-335

2004年
33. Byung-Hoon Kim, Jun-Hyung An, Kyu-Seog Hwang, Bo-An Kang, Kieshi Nishio, Toshio Tsuchiya, AFM Analysis of Chemical-Solution-Derived Epitaxial PZT Films Prepared by Using Oxidizing nr Non-Oxidizing Pyrolysis, J. Korean Physical Society Vol.44 February (2004) pp. 346-349

〜2003年
34. Tomoya Konishi, Hondo Takaharu, Tesuo Araki, Keishi Nishio, Toshio Tsuchiya, Takehisa Matsumoto, Shigeru Suehara, Shin-ichi Todoroki, Satoru Inoue, Investigation of glass formation and color properties in the P2O5-TeO2-ZnO system, J. Non-Crystalline solid, 330(1-3) (2003) pp. 278-280
35. Tomoya Konishi, Hondo Takaharu, Tesuo Araki, Keishi Nishio, Toshio Tsuchiya, Takehisa Matsumoto, Shigeru Suehara, Shin-ichi Todoroki, Satoru Inoue, Investigation of glass formation and color properties in the P2O5-TeO2-ZnO system, J. Non-Crystalline solid, 324(1,2) (2003) pp. 58-66
36. Keishi Nishio, Yuichi Watanabe and Toshio Tsuchiya, Epitaxial Growth of SrxBa1-xNb2O6 Thin Films Prepared from Sol-Gel Process, J. Sol-Gel Sci. and Tech., 26, (2003) pp. 245-250
37. T. Kodaira, K. Nishio, I. Yamaguchi, S. Suzuki, K. Tsukada and T. Tsuchiya, Synthesis and Properties of Highly Conductive Thin Films as Buffer Layer from Sol-Gel Process, J. Sol-Gel Sci. and Tech., 26, (2003) pp. 1049-1050
38. Toshio Tsuchiya and Keishi Nishio, Sol-gel process for ferroelectric epitaxial thin film multilayer for FRAM, Materials Integration, 15(3), (2002) pp. 84-86
39. Teppei ONUKI, Youuichi WATANABE, Keishi NISHIO, Toshio TSUCHIYA, Toshirou TANI and Takashi TOKIZAKI, Fabrication and Evalution of Nanometer-Sized Metal Oxide Structures on Compositite Metal Thin Films Using Near-Field Optical Microscope, Jpn. J. Appl. Phys., 41 (2002), pp.1-8
40. J. THONGRUENG, K. NISHIO, Y. WATANABE, K. NAGATA and T. TSUCHIYA, PREPARATION OF SOL-GEL DERIVED BaTi(Hf,Zr)O3 THIN FILMS AND THEIR PROPERTIES, J. Aust. Ceram. Soc., [37], 1 (2001) pp.51-56
41. Keishi Nishio, Yasutaka Sumida, Yuichi Watanabe and Toshio Tsuchiya, Preparation and properties of electrochromic -MnO2 thin film by dip coating method, J. Ceram. Soc. Jpn, 109 (2001) pp.834-839
42. Keishi Nishio, Tsutomu Miyazawa, Yuichi Watanabe and Toshio Tsuchiya, "Preparation and Properties of Inorganic-Organic Hybrid Li+ Ion Conductor by Sol-gel Process", The Korean J. Ceram., 7[1], (2001) pp. 1-5
43. Watanabe, Yuichi; Namikawa, Gaku; Onuki, Teppei; Nishio, Keishi; Tsuchiya, Toshio, “Photosensitivity in phosphate glass doped with Ag+ upon exposure to near-ultraviolet femtosecond laser pulses”, Appl. Phys. Lett., 78(15) (2001) pp.2125-2127
44. Keishi Nishio and Toshio Tsuchiya, “Electrochromic thin films by sol-gel process", Solar Energy Materials and Solar Cells, 68 (2001) pp.279-93
45. Keishi Nishio and Toshio Tsuchiya, “Organic-inorganic hybrid ionic conductor prepared by sol-gel process”, Solar Energy Materials and Solar Cells, 68, Issues 3-4, (2001) pp.295-306.
46. KEISHI NISHIO, KOJI OKUBO, YUICHI WATANABE AND TOSHIO TSUCHIYA, Structural Analysis and Properties of Organic-Inorganic Hybrid Ionic Conductor Prepared by Sol-Gel Process, J. Sol-Gel Sci. and Tech., 19 (2000) pp.187-191
47. Jirawat Thongrueng, Keishi Nishio, Yuichi Watanabe, Kunihiro Nagata and Toshio Tsuchiya, Preparation and Properties of Soft-BaTiO3 Thin Films by Sol-Gel Process, Key Engineering Materials, 181-182 (2000) pp.85-88
48. Jirawat THONGRUENG, Keishi NISHIO, Kunihiro NAGATA and Toshio TSUCHIYA, Preparation and Characterization of Ferroelectric BaTi0.91(Hf0.5Zr0.5)0.09O3 Thin Films by Sol-Gel Process Using Taitanium and Zirconium Alkoxides, Jpn. J. Appl. Phys., Vol. 39 (2000) pp.5393-5398
49. KEISHI NISHIO, NOBUHIRO SEKI, JIRAWAT THONGRUENG, YUICHI WATANABE AND TOSHIO TSUCHIYA, Preparation and properties of Highly Oriented Sr0.3Ba0.7Nb2O6 Thin Films by a Sol-Gel Process, J. Sol-Gel Sci. and Tech., 16 (1999) pp.37-45
50. Gengiro Furuhashi, Yuichi Watanabe, Keishi Nishio, Toshio Tsuchiya, Two-photon and non-linear refraction in binary alkali germanate glasses at 355 nm, J. Non-Cryst. Solids 259 (1999) pp.127-131
51. Keishi NISHIO, Tadanori SEI and Toshio TSUCHIYA, Preparation of Electrochromic Tungsten Oxide Thin Film By Sol-Gel Process, J. Ceram. Soc. Jpn., 107 (1999) pp.199-203
52. K. Nishio, Y. Watanabe, T. Tsuchiya, Preparation and properties of electrochromic iridium oxide thin film by sol-gel process, Thin Solid Films 350 (1999) pp.96-100
53. Shirou Otsuki, Keishi Nishio, Tohru Kineri, Yuiichi Watanabe and Toshio Tsuchiya, Optical Properties of Gold-Dispersed Barium Titanate Thin Films Prepared by Sol-Gel Process, J. Am. Ceram. Soc., 82 (1999) pp.1676-1680
54. Tomohiro Umeda, Keishi Nishio, Yuichi Watanabe and Toshio Tsuchiya, Preparation of porous hydroxyapatite thin film on titanium metal substrate by sol-gel process, Phosphorus Research Bulletin, 8 (1998) pp.31-36
55. K. NISHIO, S. MIYAKE, T. SEI, Y. WATANABE, T. TSUCHIYA, Preparation of highly oriented thin film exhibiting transparent conduction by sol-gel process, J. Mater. Sci., 31 (1996) pp.3651-3656
56. KEISHI NISHIO, TADANORI SEI, TOSHO TSUCHIYA, Preparation and electrical properties of ITO thin films by dip-coating process, J. Mater. Sci., 31 (1996) pp.1761-1766
57. K. Nishio, S. Miyake, T. Sei and T. Tsuchiya, Preparation and properties of transparent electrical conductive thin film by sol-gel process with metal salts, Trans. Mater. Res. Soc. Jpn., 20 (1996) pp.514-517


3.　プロシーディングス（査読有り）

2013年
１．K. Sakurai, T. Hanawa, N. Kikuchi, K. Nishio, K. Tonooka, R. Wang, H. Bando, and H. Takashima, Epitaxial Growth of (Na,K)NbO3 Films by Pulsed Laser Deposition, Materials Research Society, 1494巻, (2013)
２．Natsuko Mikami, Keishi Nishio, Koya Arai, Tatsuya Sakamoto, Masahiro Minowa, Tomoyuki Nakamura, Naomi Hirayama, Yasuo Kogo and Tsutomu Iida, Thermoelectrical properties of α phase and γ phase NaxCo2O4 ceramics prepared by spark plasma sintering method, Mater. Res. Soc. Symp. Proc., 1490巻, (2013)
３．Koya Arai, Keishi Nishio, Norifumi Miyamoto, Kota Sunohara, Tatsuya Sakamoto, Hiroshi Hyodo, Naomi Hirayama, Yasuo Kogo and Tsutomu Iida, Fabrication of Mg2Si bulk by spark plasma sintering method with Mg2Si nano-powder, Mater. Res. Soc. Symp. Proc., 1490巻, (2013)
４．Tomoyuki Nakamura, Kazuya Hatakeyama, Masahiro Minowa, Youhiko Mito, Koya Arai, Tsutomu Iida and Keishi Nishio, Power generation performance of π-structure thermoelectric device using NaCo2O4 and Mg2Si elements, Mater. Res. Soc. Symp. Proc., 1490, (2013)

2012年
５．T. Sakamoto, K. Sugiyama, D. Mori, M. Ogi, K. Nishio, Y. Kogo, Y. Takanashi, and T. Iida, Formation of Ni electrodes on sintered N-type Mg2Si using monobloc sintering and electroless plating methods, American Institute of Physics Conf. Proc., 1449, 223-226, (2012)
６．Y. Hayatsu, T. Iida, T. Sakamoto, S. Kurosaki, K. Nishio, Y. Kogo, and Y. Takanashi, Fabrication of Large Sintered Pellets of Sb-doped N-type Mg2Si Using a Plasma Activated Sintering Method, American Institute of Physics Conf. Proc., 1449, 187-190, (2012)
７．K. Nishio, Y. Sawada, K. Arai, T. Sakamoto, Y. Kogo, and T. Iida, Fabrication of thermoelectric modules with Mg2Si and SrRuO3 by the spark plasma sintering method, American Institute of Physics Conf. Proc., 1449, 463-466, (2012)
８．Y. Yamaguchi, T. Kineri, K. Nishio, Gasochromic and electrical properties of Pt-nanoparticle-dispersed tungsten oxide thin films prepared by a sol-gel process, Materials Research Society Online Proceedings (2012) mrsf11-1400-s06-12(6 pages), 10.1557/opl.2012.471

〜2010年
９．Miki Amari, Satoshi Okada, Masahiko Demura, Keishi Nishio, Hirobumi Shibata, Tohru Kineri, Takahiro Gunji, Ryuji Tamura, Synthesis of Pt-TM(transition metals) Catalysts and Their Hydrogenation Ability of Methyl Acrylate, Catalytic Materials for Energy, Green Processes and Nanotechnology, 1217 (2010) 1217-Y08-34
１０．Takanori Imai, Yoshimoto Abe, Keishi Nishio, Ryuji Tamura, Hirobumi Shibata, Tohru Kineri, Takahiro Gunji, Preparation of Platinum Nanoparticles Using Linear Polyethyleneimine as a Stabilizer by Liquid-phase Reduction Method, Catalytic Materials for Energy, Green Processes and Nanotechnology, 1217 (2010) 1217-Y08-17
１１．Yukitoshi Chiba, Hirobumi Shibata, Daichi Nagata, Takahiro Gunji, Ryuji Tamura, Tohru Kineri, Keishi Nishio, Preparation of Pt Nanoparticles Dispersed in Mesoporous Silica, Catalytic Materials for Energy, Green Processes and Nanotechnology, 1217 (2010) 1217-Y08-24
１２．N. Fukushima, T. Iida, M. Akasaka, T. Nemoto, T. Sakamoto, R. Kobayashi, H. Taguchi, K. Nishio and Y. Takanashi, Thermoelectric properties of Sb-doped sintered Mg2Si fabricated using commercial polycrystalline sources, Materials and Devices for Thermal-to-Electric Energy Conversion, Mater. Res. Soc. Proc., 1166 (2009) N03-21.1-N03-21.6
１３．Keishi Nishio, Tomomi Okada, Naoto Kikuchi, Satoshi Mikusu, Tsutomu Iida, Kazuyasu Tokiwa, Tsuneo Watanabe and Tohru Kineri, Preparation of delafossite CuYO2 by metal-citric acid complex decomposition method, Mater. Res. Soc. Symp. Proc., 116 (2009) 1166-N03-13
１４．Takashi Nemoto, Junichi Sato, Tsutomu Iida, Masayasu Akasaka, Atsunobu Matsumoto, Tadao Nakajima, Keishi Nishio, Yoshifumi Takanashi, Doping Characteristics of Silver in Mg2Si1-xGex Prepared by Plasma Activated Sintering, Materials Research Society Symposium Proceedings, (2008) 1044-U06-14
１５．Masayasu Akasaka, Tsutomu Iida, Youhiko Mito, Takeru Omori, Yohei Oguni, Shigeki Yokoyama, Keishi Nishio, Yoshifumi Takanashi, Fabrication of Mg2Si from a Reused-silicon Source and its Thermoelectric Characteristics, Materials Research Society Symposium Proceedings, (2008) 1044-U06-15
１６．Yohei Oguni, Tsutomu Iida, Atsunobu Matsumoto, Takashi Nemoto, Junichi Onosaka, Hironori Takaniwa, Tatsuya Sakamoto, Daisuke Mori, Masayasu Akasaka, Junichi Sato, Tadao Nakajima, Keishi Nishio, Yoshifumi Takanashi, Formation of transition-metal-based ohmic contacts to n-Mg2Si by Plasma Activated Sintering, Materials Research Society Symposium Proceedings, (2008) 1044-U09-16
１７．Yumi Tanaka, Nami Ukai, Keishi Nishio, and Kimihiro Yamashita, Low temperature degradation and biomedical properties of Y-TZP ceramics, Advances in Bioceramics and Porous Ceramics, Proceedings of the 32nd International Conference on Advanced Ceramics and Composites, The American Ceramic Society, (2008)　電子媒体
１８．H. Takenouchi, T. Imai, H. Mae, M. Fujimoto, T. Kineri, T. Iida, N. Hamada, T. Watanabe, K. Nishio, Synthesis and thermoelectric properties of Y doped SrTiO3 by modified Pechini’s method, Materials Research Society Symposium Proceedings, (2008) 1044-U06-11
１９．Keishi Nishio, Kazuhiko Fukuda, Hirohumi Takenouchi, Hideo Mae, Masakatsu Fujimoto, Tsutomu Iida, Tohru Kineri and Tsuneo Watanabe, Preparation and properties of Srn+1TinO3n+1 Ruddlesden-Popper homologous series by metal-citric acid complex decomposition method, Materials Research Society Symposium Proceedings, (2008) 1044-U06-03
２０．T. Nemoto, M. Akasaka, T. Iida, J. Sato, K. Nishio, T. Takei, and Y. Takanashi, Characterization of oxide-incorporated n-type Mg2Si prepared by a spark plasma sintering method, Proceeding of the IEEE 25th Intl. Conference on Thermoelectrics, (2006) pp. 552-555
２１．Keishi Nishio, Yasushi Kaneko, Kazuhiko Fukuda, Tsutomu Iida, Yoshihumi Takanashi, Atsuo Yasumori, Tsuyoshi Yoshimura, Kazuma Takahashi, Atsushi Torai, Kazuyasu Tokiwa and Tsuneo Watanabe and Tohru Kineri, PREPARATION AND THERMOELECTRIC PROPERTIES OF HIGHLY ORIENTED Na1.5Co2O4 AND Ca3Co4O9 CERAMICS BY THE SPARK PLASMA SINTERING METHOD, 6TH PACIFIC RIM CONFERENCE ON CERAMIC AND GLASS TECHNOLOGY PROCEEDINGS, THE AMERICANCERAMIC SCIETY CD (in Hawaii (Maui)) 11-16th, September (2005) 電子媒体
２２．Keishi Nishio, Kazuma Takahashi, Yusuke Inaba, Mariko Sakamoto, Tsutomu Iida, Kazuyasu Tokiwa, Yasuo Kogo, Atsuo Yasumori, Tsuneo Watanabe, Preparation and thermoelectric properties of high oriented NaxCo2O4+ ceramics by Spark plasma sintering method, 23rd International Conference on Thermoelectrics-ITC2004 in Adelaide (Australia) Proceedings CD (Paper No. #97), Released (2005) 電子媒体
２３．Keishi Nishio, Rena Maeda, Junsuke Kihou, Yasuo Kogo, Tohru Kineri and Atsuo Yasumori, "Preparation of textured bismuth titanate ceramics by through templated grain growth method application for combined with spark plasma sintering method", Materials Research Society Symposium Proceedings, Solid-State Chemistry of Inorganic Materials V, 848, (2005) pp.127-132
２４．T. Yoshimura, K. Nishio, K. Takahashi, K. Tokiwa, T. Kineri, A. Yasumori, and T. Watanabe, Preparation and thermoelectric properties of textured Ca3Co4O9+ ceramics by spark plasma sintering method, Transaction of the Materials Research Society of Japan, 30 [2], June (2005) pp.519-522
２５．Tomoya Konishi, Hondo Takaharu, Tesuo Araki, Keishi Nishio, Toshio Tsuchiya, Takehisa Matsumoto, Shigeru Suehara, Shin-ichi Todoroki, Satoru Inoue, Glass formation and reddish coloring properties in Zinc phosphotellurite glass, Materials Research Society Symposium Proceedings 754(Supercooled Liquids, Glass Transition and Bulk Metallic Glasses), (2003) pp.465-470
２６．Keishi Nishio, Chikako Kudou, Tsutomu Nagahama, Takaaki Manabe, Iwao Yamaguchi, Yuichi Watanabe and Toshio Tsuchiya, PREPARATION AND CHARACTERIZATION OF EPITAXIAL Bi2WO6 THIN FILMS PREPARED BY A SOL-GEL PROCESS, Mat. Res. Soc. Symp. Proc., 633 (2000) pp.377-382
２７．Keishi Nishio, Jirawat Thongrueng, Yuichi Watanabe and Toshio Tsuchiya, EPITAXIAL GROWTH OF Sr0.3Ba0.7Nb2O6 THIN FILM PREPARED BY SOL-GEL PROCESS, Mat. Res. Soc. Symp. Proc., 606 (2000) pp.181-186
２８．T. Toriyama, N. Namiki, N. Hayashi, I. Sakamoto, H. Wakabayashi, H. Iijima, and K. Nishio, “Conversion Electron Mössbauer Spectroscopy(CEMS) and X-ray Diffraction Studies of 40keV He-Irradiated SUS304 Austenitic Stainless Steel(II)”, Proc. of the 19th Symposium on Materials Science and Engineering, Research Center of Ion Beam Technology, Hosei University, (2000) pp.179-182.
２９．T. Toriyama, T. Ishibashi, N. Hayashi, I. Sakamoto, K. Nishio, H. Wakabayashi and H. Iijima, “Conversion Electron Mössbauer Spectroscopy(CEMS) and X-ray Diffraction Studies of 40keV He-Irradiated SUS304 Austeni- tic Stainless Steel”, IEEE, Ion Impl. Technol.’98, 2 (1999) pp. 783-786
３０．Keishi Nishio, Tadanori Sei, Toshio Tsuchiya, Preparation and properties of Fully Solid State Electrochromic Display Thin film From Sol-Gel Process, SPIE (Sol-Gel Optics IV), 36 (1997) pp.419-425


4.　プロシーディング（査読無し）
1.　Shigeki KISHI, Satoshi NAKAMURA, Keishi NISHIO, Kimihiro YAMASHITA, Mechanical and Biocompatibility Evalutions of Hydroxyapatite / Alumina-Zirconia Composite Ceramics, Archives of BioCeramics Research, 4. (2004) pp.43-46


5.　総説・解説・著書等

解説
1.　エレクトロクロミズムとその応用、J. the Inorganic Materials, Japan, Vol.11, (2004) pp. 494-498
2.　ゾル−ゲル法と放電プラズマ焼結法を併用した機能性セラミックスの創製、J. the Inorganic Materials, Japan, Vol.16, (2009) pp. 62-67


6.　著書
1.　 エレクトロニクス用セラミックスの製造プロセスと応用技術（大全集）,西尾圭史,技術情報協会,pp275-290,2007（共著）
２．目的を達成するためのゾル-ゲル法における構造制御ノウハウ集、技術情報協会（2003年）（共著）
３．HANDBOOK OF SOL-GEL SCIENCE AND TECHNOLOGY, Processing Characterization and Applications. EDITOR Sumio Sakka, Volume Editor Hiromitsu Kozuka, “Sol-Gel Processing of Thin Films with Metal Salts”, p.59-76 (2004) Kluwer Academic Publishers, Kluwer Academic publishers Group Post Office Box 322, 3300 AH Dordrecht, The Netherlands、（共著）
４．実用材料の表面機能化設計テクノロジー、産業技術サービスセンター、西尾圭史他119名（共著）、日本語（2010年6月）820ページ

LinkIconAccess

葛飾キャンパス写真LinkIcon

HOME > 業績

Copyright 2011 ◯◯◯◯◯. All Rights Reserved.